Page:A complete course in dressmaking, (Vol. 3, Underwear) (IA completecoursein03cono).pdf/42

 diagrams from the neck edge in the front to the lower edge and from the neck edge in the back to the lower edge. Add these two measurements and subtract the total from the amount the cord measured. This gives you the amount to make the strap from point C to B. Curve the upper part of the strap to blend into the lower edge line.

Lay a piece of paper underneath the front diagram and trace around the outer edges of the chemise pattern.

In cutting out the pattern, allow seams at the neck, armhole, shoulder, underarm and lower edges. The center-front is laid on the fold when the garment is cut out, so does not