Page:A complete course in dressmaking, (Vol. 2, Aprons and House Dresses) (IA completecoursein02cono).pdf/24

 they are placed usually as nearly on a true crosswise as possible, which means at right angles to the selvedge edges of the material.

There are two ways of laying a pattern on the goods. The goods may be laid in a single thickness or folded double. When folded double, usually the selvedges are brought together and the material is creased through the center lengthwise; although there are cases where it is advantageous to fold it crosswise.

It may even happen that material can be saved by folding over only a third, a quarter or less on the lengthwise, leaving the rest in a single thickness.

In spreading out the material in a single thickness or in folding it double, keep the wrong side uppermost. It is by far the best plan, when possible, to lay the pattern on the wrong side of the goods. Then you can mark on the goods without danger of injuring the fabric, except in cases of very sheer materials.

Although it is possible to pin a tissue paper pattern to the goods and then cut the piece, it is better to weigh down any pattern and