Page:ASTM v. PRO (D.D.C. 2022).pdf/98

 regulation, see Becker Decl. ¶ 57, Ex. 90; Wise Decl., Ex. 176, which incorporates the standard into 46 C.F.R. § 56.60-2. Section 56.60-2 states that ASTM B16 provides the adopted bar stock and nonferrous forging and casting specifications for soft and half hard tempers. 46 C.F.R. § 56.60-2, Table 2(a). The regulation does not specify that only certain provisions of ASTM B16 (1992) are incorporated by reference into law, nor does it indicate which specific provisions of ASTM B16 (1992) are relevant for compliance with the regulation.
 * 1) * First Factor : There is no indication that Defendant stands to profit from republishing this standard; Defendant’s apparent purpose is to inform the public about the law and facilitate public debate. See ASTM, 896 F.3d at 449; Def’s 2d Mot. at 16. Defendant’s “attempt to freely distribute standards incorporated by reference into law qualifie[s] as a use that further[s] the purposes of the fair use defense.” ASTM, 896 F.3d at 449. Further, the incorporated standard provides information essential for a private entity to comprehend its legal duties, which weighs heavily in favor of permitting Defendant’s reproduction. See ASTM, 896 F.3d at 450.
 * 2) * Second Factor : The “express text of the law falls plainly outside the realm of copyright protection.” ASTM, 896 F.3d at 451. Here, the standard is incorporated into law without limitation such that “the consequence of the incorporation by reference is virtually indistinguishable from a situation in which the standard had been expressly copied into law.” Id. at 452. Accordingly, “this factor weighs heavily in favor of fair use.” Id.
 * 3) * Third Factor : The incorporating regulation does not specify that only certain provisions of this standard are incorporated by reference into law, nor does it indicate which specific provisions of the standard are relevant for regulatory compliance, suggesting that “a greater amount of the standard’s text might be fairly reproduced.” Id.
 * 4) * Fourth Factor : Defendant’s reproductions have not had a “substantially adverse impact on the potential market for the originals,” nor have Plaintiffs shown by a preponderance of the evidence that there is a meaningful likelihood of future harm.” Memo Op. at 30–36 (internal quotation and citation marks omitted).
 * 5) * Conclusion : Defendant may fairly reproduce this incorporated standard in its entirety.
 * 6) ASTM B21 (1996):
 * 7) *The parties identify 46 C.F.R. § 56.01-2 (2011) as the incorporating by reference regulation, see Becker Decl. ¶ 57, Ex. 90; Wise Decl., Ex. 176, which incorporates the standard into 46 C.F.R. § 56.60-2. Section 56.60-2 establishes bar stock and nonferrous forging and casting specifications, supplementary testing requirements, and service limitations for welded pipe and tubing, and identifies ASTM B21 as providing specifications for three types of alloy. 46 C.F.R. § 56.60-2(a) (Table). It also requires that “[a]llowable stresses shall be the same as those listed in UNF23 of section VIII of ASME Boiler and Pressure Vessel Code for SB-171, naval brass.” Id. § 56.60-2(a) n.8. The regulation does not specify that only certain provisions of ASTM B21 (1996) are incorporated by reference into law, nor does it indicate which specific provisions of ASTM B21 (1996) are relevant for compliance with the regulation.
 * 8) * First Factor : There is no indication that Defendant stands to profit from republishing