Page:ASTM v. PRO (D.D.C. 2022).pdf/190

 (Reapproved 2002). While the regulation incorporates ASTM E 408-71 (Reapproved 2002), not the 1971 version that Defendant published, the text of the two standards is identical. See Pls. 2d SMF ¶ 35; Def. Statement of Disputed Facts at ¶ 35 (no objection); Def. Mot. at 10 (citing Def. 2d SMF ¶ 84). Section 460.5(b) requires that “Single sheet systems of aluminum foil must be tested with ASTM E 408–71 (Reapproved 2002), “Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques,” or ASTM C 1371–04a, ‘Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers.’” The regulation does not specify that only certain provisions of ASTM E 408-71 (Reapproved 2002) are incorporated by reference into law, nor does it indicate which specific provisions of ASTM E 408-71 (Reapproved 2002) are relevant for compliance with the regulation.
 * 1) * First Factor : There is no indication that Defendant stands to profit from republishing this standard; Defendant’s apparent purpose is to inform the public about the law and facilitate public debate. See ASTM, 896 F.3d at 449; Def’s 2d Mot. at 16. Defendant’s “attempt to freely distribute standards incorporated by reference into law qualifie[s] as a use that further[s] the purposes of the fair use defense.” ASTM, 896 F.3d at 449. See also id. at 451 (“Faithfully reproducing the relevant text of a technical standard incorporated by reference for purposes of informing the public about the law obviously has great value.”) (emphasis added). Further, the incorporated standard provides information essential for a private entity to comprehend its legal duties, which weighs heavily in favor of permitting Defendant’s reproduction. See id. at 450.
 * 2) * Second Factor : The “express text of the law falls plainly outside the realm of copyright protection.” ASTM, 896 F.3d at 451. Here, the text published by Defendant is identical to text that was incorporated into law without limitation, such that “the consequence of the incorporation by reference is virtually indistinguishable from a situation in which the standard had been expressly copied into law.” Id. at 452. Accordingly, “this factor weighs heavily in favor of fair use.” Id.
 * 3) * Third Factor : The incorporating regulation does not specify that only certain provisions of the text in ASTM E 408-71 (Reapproved 2002) are incorporated by reference into law, nor does it indicate which specific provisions of the standard are relevant for regulatory compliance, suggesting that “a greater amount of the standard’s text might be fairly reproduced.” Id.
 * 4) * Fourth Factor : Defendant’s reproductions have not had a “substantially adverse impact on the potential market for the originals,” nor have Plaintiffs shown by a preponderance of the evidence that there is a meaningful likelihood of future harm.” Memo Op. at 30–36 (internal quotation and citation marks omitted).
 * 5) * Conclusion : Defendant may fairly reproduce the text of ASTM E 408 (1971) in its entirety.
 * 6) ASTM E711 1987 (1992):
 * 7) *Defendant identifies 40 C.F.R. § 63.14 (2011) as the incorporating by reference regulation, see Becker Decl. ¶ 57, Ex. 90 at 18, which incorporates ASTM E711-87 (Reapproved 2004) for table 6 to subpart DDDDD of this part and table 5 to subpart