Page:ASTM v. PRO (D.D.C. 2022).pdf/154

 Specifications. This procedure has been incorporated by reference (see §86.1).”); id. § 86.1708-99 (“Both the projected emissions and the Highway Fuel Economy Test standard shall be rounded to the nearest 0.1 g/mi in accordance with the Rounding-Off Method specified in ASTM E29–90, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications, before being compared. These procedures are incorporated by reference (see §86.1).”). These regulations do not specify that only certain provisions of ASTM E29 (1990) are incorporated by reference into law, nor do they indicate which specific provisions of ASTM E29 (1990) are relevant for compliance with the regulation.
 * 1) * First Factor : There is no indication that Defendant stands to profit from republishing this standard; Defendant’s apparent purpose is to inform the public about the law and facilitate public debate. See ASTM, 896 F.3d at 449; Def’s 2d Mot. at 16. Defendant’s “attempt to freely distribute standards incorporated by reference into law qualifie[s] as a use that further[s] the purposes of the fair use defense.” ASTM, 896 F.3d at 449. Further, the incorporated standard provides information essential for a private entity to comprehend its legal duties, which weighs heavily in favor of permitting Defendant’s reproduction. See ASTM, 896 F.3d at 450.
 * 2) * Second Factor : The “express text of the law falls plainly outside the realm of copyright protection.” ASTM, 896 F.3d at 451. Here, the standard is incorporated into law without limitation such that “the consequence of the incorporation by reference is virtually indistinguishable from a situation in which the standard had been expressly copied into law.” Id. at 452. Accordingly, “this factor weighs heavily in favor of fair use.” Id.
 * 3) * Third Factor : The incorporating regulation does not specify that only certain provisions of this standard are incorporated by reference into law, nor does it indicate which specific provisions of the standard are relevant for regulatory compliance, suggesting that “a greater amount of the standard’s text might be fairly reproduced.” Id.
 * 4) * Fourth Factor : Defendant’s reproductions have not had a “substantially adverse impact on the potential market for the originals,” nor have Plaintiffs shown by a preponderance of the evidence that there is a meaningful likelihood of future harm.” Memo Op. at 30–36 (internal quotation and citation marks omitted).
 * 5) * Conclusion : Defendant may fairly reproduce this incorporated standard in its entirety.
 * 6) ASTM E424 (1971):
 * 7) *The parties identify 24 C.F.R. § (Parts 200 to 499) (2005) as the incorporating by reference regulation, see Becker Decl. ¶ 57, Ex. 90; Wise Decl., Ex. 176, which incorporates ASTM E424 (1971) into 24 C.F.R. § Part 200, Subpart S. See 24 C.F.R. § (Parts 200 to 499). That regulation does not specify that only certain provisions of ASTM E424 (1971) are incorporated by reference into law, nor does it indicate which specific provisions of ASTM E424 (1971) are relevant for compliance with the regulation.
 * 8) * First Factor : There is no indication that Defendant stands to profit from republishing this standard; Defendant’s apparent purpose is to inform the public about the law and facilitate public debate. See ASTM, 896 F.3d at 449; Def’s 2d Mot. at 16. Defendant’s