Page:4SIGHT manual- a computer program for modelling degradation of underground low level waste concrete vaults (IA 4sightmanualcomp5612snyd).pdf/63

 References

[1] J.R. Clifton, and L.I. Knab, "Service Life of Concrete," NISTIR 89-4086, U.S. Department of Commerce, (1989).

[2] J.M. Pommersheim, and J.R. Clifton, "Models of Transport Processes in Concrete," NISTIR 4405, U.S. Department of Commerce, (1990).

[3] R.B. Bird, W.E. Stewart, and E.N. Lightfoot, Transport Phenomenon, John Wiley & Sons, New York, (1960).

[4] J.C. Slattery, Mass Transport, McGraw-Hill Book Company, New York, (1972).

[5] A. Atkinson, and J.A. Hearne, "Mechanistic Models For The Durability Of Concrete Barriers Exposed To Sulfate-Bearing Groundwaters," MRS Proc., 176, 149-156, (1990).

[6] H.F.W. Taylor, Cement Chemistry, Academic Press, New York, (1990).

[7] Young and Hansen, "Volume Relationships for C-S-H Formation Based on Hydration Stoichiometrics," Proc. MRS, Eds. Struble and Brown, 85, 313-322, (1987).

[8] A. Atkinson, A.K. Nickerson, and T.M. Valentine, "The Mechanism of Leaching From Some Cement-Based Nuclear Wasteforms," Radioactive Waste Management and the Nuclear Fuel Cycle, 4 (4), 357-378, (1984).

[9] J. Walton, L. Plansky, and R. Smith, "Models for Estimation of Service Life of Concrete Barriers in Low-Level Radioactive Waste Disposal," NUREG/CR-5542, EGG2597, (1990).

[10] E.J. Garboczi and D.P. Bentz, "Computer simulation of the diffusivity of cement-based materials," J. Materials Science, 27, 2083-2092, (1992).

[11] T. Luping, and L. Nilsson, "Rapid Determination of the Chloride Diffusivity in Concrete by Applying an Electric Field," ACI Materials Journal, 89 (1), 49–53, (1992).

[12] E.J. Garboczi, L. M. Schwartz, and D.P. Bentz, "Modelling the influence of the interfacial zone on the D.C. electrical conductivity of mortar," (Submitted to) Journal of the ACBM.

[13] N. Hearn, R.D. Hooton, and R.H. Mills, "Pore Structure and Permeability," Significance of Tests and Properties of Concrete and Concrete-Making Materials, Eds. Klieger and Lamond, ASTM, 240-262, (1994).