Code of Federal Regulations/Title 29/Chapter XVII/Part 1910/Subpart H

Subpart H—Hazardous Materials

Dipping and Coating Operations
 * § 1910.101 Compressed gases (general requirements)
 * § 1910.102 Acetylene
 * § 1910.103 Hydrogen
 * § 1910.104 Oxygen
 * § 1910.105 Nitrous oxide
 * § 1910.106 Flammable and combustible liquids
 * § 1910.107 Spray finishing using flammable and combustible materials
 * § 1910.108 Reserved
 * § 1910.109 Explosives and blasting agents
 * § 1910.110 Storage and handling of liquified petroleum gases
 * § 1910.111 Storage and handling of anhydrous ammonia
 * § 1910.112 Reserved
 * § 1910.113 Reserved
 * § 1910.119 Process safety management of highly hazardous chemicals
 * § 1910.120 Hazardous waste operations and emergency response
 * § 1910.121 Reserved
 * § 1910.122 Table of contents
 * § 1910.123 Dipping and coating operations: Coverage and definitions
 * § 1910.124 General requirements for dipping and coating operations
 * § 1910.125 Additional requirements for dipping and coating operations that use flammable or combustible liquids
 * § 1910.126 Additional requirements for special dipping and coating operations

Authority

 * Sections 4, 6, 8 of the Occupational Safety and Health Act of 1970 (29 U.S.C. 653, 655, 657)
 * Secretary of Labor's Orders
 * No. 12–71 (36 FR 8754)
 * No. 8–76 (41 FR 25059)
 * No. 9–83 (48 FR 35736)
 * No. 1–90 (55 FR 9033)
 * No. 6–96 (62 FR 111)
 * No. 3–2000 (65 FR 50017)
 * No. 5–2002 (67 FR 65008)
 * 29 CFR part 1911
 * Section 1910.119 also issued under section 304, Clean Air Act Amendments of 1990 (Pub. L. 101-549), reprinted at 29 U.S.C. 655 Note.
 * Section 1910.120 also issued under section 126, Superfund Amendments and Reauthorization Act of 1986 as amended (29 U.S.C. 655 Note), and 5 U.S.C. 553.